Walbro Carburetor Parts

 
AB Marine Annialator Cat 43 in Evo 1 Walbro WYK-58 high-performance barrel carburetor
Bartolone Racing Carburetor Needle Clamp KitWalbro WYK-58 high-performance barrel carburetor

Tired of your carb needles vibrating out of tune? Bartolone Racing has the answer! 

Walbro WYK-58 high-performance barrel carburetor. 15mm bore, 13.5mm venturi. Adjustable high-end jet. For scooters - fits G43L engine (on GSR40 and Go-Bike) when used with the ADA billet GSR40 intake manifold. Fits G43L engine on GSR40-TS using...

$9.99

$47.00

AB Marine Annialator Cat 43 in Evo 1 Chung Yang +2mm Stuffed Crankshaft (30mm total)
Carburetor Linkage Arm & ScrewSocket Holder Adapter for 1/4" Hex Drivers

Carburetor Linkage Arm & Screw

Socket Holder Adapter for 1/4" Hex Drivers. These fit both types of our 1/4" drivers (standard and ball-end) and give you greater flexibility when working with your drivers. 

$3.50

$1.99

Chung Yang +2mm Stuffed Crankshaft (30mm total) Walbro Throttle Shaft
TGN Brass Easy Grip Carb Tune NeedleThrottle Shaft for Walbro WT Carburetors

For the Baja Driver that is constantly tuning their ride, whether your a racer or a basher replace your high end carb needle with the new TGN Easy Grip Carb Needle, 

Throttle arm for most Walbro WT-style carburetors. Allows mounting of swivel and cable. Walbro Part # 30-147 Stock part on the CY23RC

$13.00

$4.00

Walbro Fuel Intake Nipple Walbro Low Speed Needle for WT Carburetor
Walbro Fuel Intake Nipple Walbro WT Carburetor Low Speed Needle

Walbro Fuel Intake nipple for Walbro WT carburetors.

Walbro WT Carburetor Low Speed Needle

$3.50

$2.20

Walbro WT Carburetor High Speed Needle Primer Bulb for Walbro Carburetors
Walbro WT Carburetor High Speed Needle Primer Bulb for Walbro Carburetors

WT Carburetor High Speed Needle

Replacement primer bulb for Walbro carburetors. Fits WA-167, WT-603, WT-643, WT-644, WT-668, WYK-33, WYK-58, etc. Zenoah part # 1751-81510. FG part # 07373. Walbro Part # 188-12

$2.25

$4.00

Walbro Carburetor Metering Diaphram Assembly Walbro Metering Diaphram Cover
Walbro Carburetor Metering Diaphragm AssemblyWalbro Metering Diaphram Cover

Walbro Carburetor Metering Diaphragm Assembly for WT / WA series carburetors. This is the same part that comes in the rebuild kits, we are just now offering it separately as well for those who just need this diaphragm separately. Walbro Part # 95-526.

Walbro metering diaphragm cover for WT / WA series carburetors without primer bulb (e.g. WT-257, etc). Walbro part # 21-158-1.

$2.25

$2.00

Walbro Metering Spring for Carburetors WT / WA Walbro K10-WAT Rebuild Kit
Walbro Metering Spring for WT/WA CarburetorsWalbro WT-813/ WT-257 / WA-167 Rebuild Kit K10-WAT

Walbro metering diaphragm spring for WT / WA series carburetors (e.g. WT-257, etc). Walbro part # 98-344

Rebuild kit for Walbro WT-813 / WA-167 / WT-257 carburetors. Walbro part # K10-WAT.

$0.50

$8.00

Walbro WT/WA Carburetor Plastic Top Walbro WT Carburetor Spring High Speed
Walbro WT/WA Carburetor Plastic Top WT Carburetor High Speed Spring

White plastic Carburetor piece that goes under the primer bulb. This section connects to the fuel return line. Fits Walbro WA / WT carburetors. This item is part of HPI part # 15471. FG part # 07371. Walbro part 5-2540

High speed adjustment needle spring for Walbro WT carburetors. This item is part of Walbro part # 98-405

$6.00

$0.75

Wlabro Low Speed Needle Spring
WT Carburetor Low Speed Spring

Low speed adjustment needle spring for Walbro WT series carburetors.

$0.75